Rode Ntg Buying Guide
The RØDE NTG series is a line of shotgun microphones built for location sound, run-and-gun video, and voice-over work where directional pickup and low noise matter. The core trade-off is between the single-AA NTG1/NTG2 battery-powered convenience and the broadcast-grade NTG3/4/5 with RF bias, lower self-noise, and balanced XLR output. Buy the battery-free NTG5 for the lowest noise and moisture resistance, or the NTG2 for boompole flexibility without phantom power.
At a glance
- Price range
- Price range not synced yet
- Category
- Microphones & Accessories
- Data updated
- Nov 15, 2026
Current offers
Highlights
- NTG1 and NTG2 run on a single AA battery or 48V phantom; NTG3/4/5 are phantom-only with RF-bias condenser capsules.
- NTG5 self-noise is 10 dBA versus 18 dBA on NTG2—critical for quiet dialogue and ambient recordings.
- Supercardioid polar pattern delivers high off-axis rejection; NTG4+ adds internal rechargeable battery and high-pass filter.
- NTG3 is the broadcast standard with RF bias, 130 dB SPL handling, and a 10-year warranty; NTG2 is 131 dB SPL but higher noise.
Best use cases
- Boom-op dialogue on a film set: pick NTG3 or NTG5 for low self-noise and RF immunity; skip NTG2 unless phantom is unavailable.
- DSLR/mirrorless run-and-gun with no phantom power: choose NTG2 with AA battery; skip NTG3/4/5 because they require 48V phantom.
- Indoor voice-over and podcasting in a treated room: NTG4+ with internal battery and high-pass filter; skip NTG5 if you need onboard gain control.
- Outdoor field recording in humid or rainy conditions: NTG5 with RF bias and moisture-resistant construction; skip NTG1/NTG2 for heavy weather.
Buying tips
- Match phantom power: NTG3/4/5 need 48V phantom; NTG1/2 accept AA battery for cameras without phantom.
- Prioritize self-noise: 10 dBA (NTG5) suits quiet dialogue; 18 dBA (NTG2) is fine for loud environments.
- Check output connector: all NTG models use 3-pin XLR; for 3.5mm cameras add a separate XLR-to-3.5mm adapter cable.
- Consider RF bias: NTG3/4/5 resist radio interference near wireless transmitters; NTG1/2 are more susceptible.
Specs
| Power Source | AA battery / 48V phantom (NTG1-2) |
|---|---|
| Self-Noise | 10–18 dBA (model dependent) |
| Polar Pattern | Supercardioid / line + gradient |
| Output Connector | 3-pin XLR (male) |
Related searches
What to check before buying
- Verify your recorder or camera provides 48V phantom power if choosing NTG3/4/5; otherwise pick NTG1/2.
- Measure boompole length: NTG series microphones are 17–25 cm long; ensure your shock mount fits the diameter (19–21 mm).
- Confirm XLR cable gender: microphones output male XLR; you need a female-to-male cable to camera or recorder.
- Check environmental conditions: for high humidity or rain, choose NTG5 with RF bias and sealed body.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
