Photos from current listings. Actual item, color, and included accessories may vary.
Digidesign Digi 002 Buying Guide
The Digidesign Digi 002 is a FireWire-based control surface and audio interface from the Pro Tools LE era, combining motorized faders, an 8-channel mixer, and I/O in one chassis. The core buying trade-off is legacy FireWire 400 compatibility versus modern DAW integration: the mixer is a doorstop on current macOS/Windows unless you run a vintage Pro Tools LE host or a community re-driver. The decision rule is clear—buy only if you maintain a PowerPC/early-Intel Mac with Pro Tools LE or a Linux/Windows re-driver project; skip it for any contemporary recording setup.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- Recording & Studio Gear
- Status
- Offers available
- Data updated
- Nov 15, 2026
Current offers
Highlights
- Two FireWire 400 ports allow daisy-chaining; the unit requires a FireWire 400 (IEEE 1394a) host and does not function over USB.
- Eight motorized touch-sensitive faders plus a 8-channel analog mixer with 4 mic preamps (XLR/TRS combo) and 4 line inputs.
- CoreAudio driver support ended at Mac OS X 10.6 Snow Leopard; Windows requires Pro Tools LE 8 with the Digidesign ASIO driver.
- The Digi 002 Rack is the same I/O without the control surface—pick the Rack only if you already own a separate controller.
Best use cases
- Best fit: a producer restoring a Pro Tools LE 8 / Snow Leopard Mac for a vintage mix room—buy the full Digi 002 with faders, not the Rack.
- Best fit: a Linux or Windows re-driver hobbyist using the community FFADO/ASIO4ALL path—verify the exact FireWire chipset (TI or VIA) before purchase.
- Wrong fit: any user on Apple Silicon or Windows 11 expecting native plug-and-play—skip entirely; a modern USB-C interface with class-compliant drivers is the only sane path.
Buying tips
- Confirm FireWire 400 (6-pin) on both the host and the unit; a FireWire 800-to-400 cable works, but a USB-C-to-FireWire adapter chain is unreliable for audio streaming.
- Budget for a TI-chipset FireWire card (PCIe or ExpressCard) on Windows; VIA/LSI chipsets cause dropouts with the Digidesign ASIO driver.
- Inspect fader condition: motorized faders on the 002 are a known wear item—test all eight for smooth travel and no stuck caps before buying.
- Prefer units with the original power supply and a tested display; the 002's LCD backlight and PSU are the two most common failure points.
Specs
| Connection | FireWire 400 (IEEE 1394a), 2 ports |
|---|---|
| Preamp Count | 4 mic (XLR/TRS) + 4 line |
| Control Surface | 8 motorized faders (002 only) |
| Driver Support | Pro Tools LE 8 / Mac OS X 10.6 max |
Alternatives to compare
Related searches
What to check before buying
- Host computer: PowerPC G4/G5 or Intel Mac capable of booting Snow Leopard, or a Windows XP/Vista/7 machine with a TI FireWire card.
- FireWire cabling: 6-pin to 6-pin (or 6-pin to 9-pin with a 400/800 cable) and a spare port if daisy-chaining drives.
- Physical space: the full 002 is a large desktop console—measure your desk; the Rack version fits a 4U rack space.
- Software: Pro Tools LE 8 installer media and an iLok-free authorization, or a documented FFADO/community driver build.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







