Photos from current listings. Actual item, color, and included accessories may vary.
Fishman Pro EQ Platinum Buying Guide
The Fishman Pro EQ Platinum is a dedicated acoustic-instrument preamp and DI with a 4-band EQ, notch filter, and balanced XLR output, built for piezo and magnetic pickups that need tonal shaping before hitting a PA or interface. The core trade-off is feature depth versus simplicity: the Platinum adds parametric anti-feedback and phase control over basic onboard preamps, but it is a preamp not a modeler. Buy it if you need surgical tone control and feedback suppression; skip it if you want amp/cab simulation or multi-effects.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- Instrument Accessories
- Status
- Offers available
- Data updated
- Nov 16, 2026
Current offers
Highlights
- 4-band EQ with sweepable midrange plus a variable notch filter targets the 80–250 Hz piezo boom and 2–4 kHz harshness that plague under-saddle pickups.
- Balanced XLR DI output with ground lift feeds a PA or interface directly, while a 1/4-inch output can feed a stage amp simultaneously.
- Phase invert and notch-depth controls suppress acoustic feedback without gutting the pickup's body, a decisive advantage over fixed-shape onboard preamps.
- Runs on a 9V battery or optional AC adapter; the battery compartment is a maintenance item, so factor in a power supply if the unit stays on a pedalboard.
Best use cases
- Best fit: acoustic guitar or mandolin with a passive piezo under-saddle pickup into a house PA — the XLR DI and notch filter handle boom and feedback in one box.
- Best fit: upright or electric bass with a piezo bridge into a recording interface — the sweepable mids and phase control tame the piezo quack better than a plain DI.
- Wrong fit: players wanting amp/cab simulation, reverb, or multi-effects — this is a tone-shaping preamp only, so pair it with a separate modeler or IR loader.
- Skip if: your instrument already has a high-quality active onboard preamp with a notch filter and you only need a passive DI; a simple DI box covers that need.
Buying tips
- Match impedance: the 10 MΩ input suits passive piezo pickups; active pickups and magnetic soundhole pickups also work but gain staging matters, so start with the input trim low.
- Plan power: a fresh 9V alkaline gives roughly a full show; for permanent pedalboard use, add a regulated 9V DC adapter rather than relying on battery swaps.
- Use the notch as a surgical tool: set the frequency sweep to the ringing feedback pitch, then increase depth only until it stops — over-notching thins the tone.
- Check output routing: the XLR is balanced for long PA runs; use the 1/4-inch out for your stage amp and the XLR for front-of-house to avoid ground-loop hum via the ground lift.
Specs
| EQ Bands | 4-band with sweepable midrange |
|---|---|
| DI Output | Balanced XLR with ground lift |
| Feedback Control | Variable notch filter + phase invert |
| Power | 9V battery or optional 9V DC adapter |
Alternatives to compare
Related searches
What to check before buying
- Confirm your pickup type: passive piezo under-saddle or bridge pickups benefit most; active onboard systems may already cover this EQ range.
- Measure your pedalboard or stage space: the Pro EQ Platinum is a tabletop/floor unit, so allow room for the XLR and 1/4-inch cables plus adapter.
- Verify power: decide between 9V battery operation and a regulated 9V DC adapter with the correct polarity and barrel size.
- Check your signal chain: you need a 1/4-inch instrument cable in and either an XLR to PA or 1/4-inch to amp out; no companion preamp is required.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







