Photos from current listings. Actual item, color, and included accessories may vary.
Shure PG ALTA Buying Guide
Shure PG ALTA is an entry-level wired microphone series from Shure covering handheld vocal mics, instrument mics, and a dedicated 7-piece drum kit, all built around dynamic capsules and XLR connectivity. The core trade-off is simple: PG ALTA uses Shure's budget-tier capsules and ABS-bodied construction instead of the metal bodies and tighter tolerance capsules found in Shure's SM and Beta lines. Buy PG ALTA when you need genuinely usable, stage-ready Shure-flavored dynamic mics on a tight budget; step up to SM58/Beta 58A once you need road-tough metal bodies and lower handling noise.
At a glance
- Brand
- Not synced yet
- Model
- Not synced yet
- MPN
- Not synced yet
- Category
- Microphones & Accessories
- Status
- Offers available
- Data updated
- Nov 15, 2026
Current offers
Highlights
- PG ALTA is a series, not one mic: PG58 vocal, PG57/PG56 instrument, PG52 kick, PG81 condenser, and the PGADRUMKIT7 bundle covering kick, snare, and toms.
- All PG ALTA mics are dynamic (except the PG81 condenser), use standard 3-pin XLR, and require no phantom power — plug into any mixer or interface directly.
- The PGADRUMKIT7 ships with seven mics (PG52 kick, three PG56 snare/tom, two PG57, one PG58), drum clips, and a carrying bag — a complete drum-miking set.
- Construction is ABS plastic bodies and hardened steel mesh grilles; this is lighter and less drop-proof than the die-cast metal SM58/SM57, so treat PG ALTA as fixed-position gear, not a handheld beater.
Best use cases
- Best fit: home recordists and small-venue bands who need a full drum mic setup (PGADRUMKIT7) or a first vocal/instrument mic at Shure-grade reliability without SM-series cost.
- Best fit: rehearsal rooms, house-of-worship stages, and podcasters who leave mics on stands — ABS bodies are fine when mics aren't dropped or thrown around.
- Wrong fit: touring or bar gigs with heavy handheld abuse and frequent cable yanks — choose SM58/SM57 for die-cast metal bodies and replaceable grilles.
- Wrong fit: detailed studio vocal or acoustic recording where you need low self-noise and condenser sensitivity — PG ALTA dynamics will sound dull and noisy for critical tracks.
Buying tips
- For drums, buy the PGADRUMKIT7 bundle only if you need all seven mics; if you only need kick and snare, buy PG52 + PG56 separately and save the clip/bag clutter.
- Check mixer/interface input count before buying the 7-piece kit: seven mics means seven XLR inputs — a 2-channel interface cannot record the full kit simultaneously.
- PG ALTA mics need no phantom power, but the PG81 condenser does — confirm your interface supplies 48V if you add PG81 to a PG ALTA dynamic setup.
- Use balanced XLR cables only; PG ALTA has no 1/4-inch or USB output, so a USB mic-only setup requires an audio interface with XLR inputs first.
Specs
| Capsule Type | Dynamic (PG81 condenser exception) |
|---|---|
| Connector | 3-pin XLR balanced |
| Phantom Power | Not required (48V only for PG81) |
| Body Material | ABS plastic / steel mesh grille |
Alternatives to compare
Related searches
What to check before buying
- Count your mixer/interface XLR inputs: the PGADRUMKIT7 needs seven simultaneous inputs for full-kit recording.
- Confirm your audio interface or mixer provides 48V phantom power if you plan to combine PG81 condenser mics with PG ALTA dynamics.
- Verify drum rim sizes for the included clips — PG56 clips fit standard snare/tom rims; oversized or die-cast hoops may need separate mounts.
- Check that you own enough XLR cables and stands: PG ALTA mics ship without cables, and the drum kit's clips do not replace floor stands for overheads.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.







