Left Handed Guitar Buying Guide
Left-handed guitars are full-scale instruments built with reversed body contours, nut/bridge orientation, and control layouts so a southpaw can play without compromised ergonomics. The core trade-off is availability versus specification: mainstream models are often ‘converted’ right-hand builds with moved straps and nuts, while true left-hand tooling delivers correct forearm and tummy cuts plus properly indexed knobs and output jacks. The decision rule: choose a factory left-hand body with a left-cut nut and reverse-angled bridge, and reject any ‘lefty’ listing whose photos show a right-hand control cavity or unmodified right-hand nut.
At a glance
- Price range
- Price range not synced yet
- Category
- Guitars & Basses
- Data updated
- Nov 16, 2026
Current offers
Highlights
- True left-hand bodies reverse the forearm and belly contours; converted right-hand bodies leave your forearm on a flat edge and the jack in your lap.
- Nut width and slot depth must be cut for left-hand string gauges: a right-hand nut flipped or slotted backward causes binding and poor intonation on the low E.
- Bridge saddle compensation is mirrored on factory lefties; a right-hand bridge strung lefty will not intonate the wound strings within a few cents.
- Control layout matters: lefty wiring places volume/tone knobs and the pickup selector where your strumming hand naturally reaches, not under your forearm.
Best use cases
- Pick a factory left-hand solidbody with reverse-angled bridge and left-cut nut if you play amplified rock, blues, or punk and need stable tuning and intonation.
- Choose a left-hand acoustic with a true left-braced top (not a flipped right-hand top) if you fingerpick or strum unplugged; flipped bracing kills bass response and can crack near the bridge.
- Skip ‘lefty-converted’ right-hand Strat-style copies with a flipped nut and right-hand bridge if you bend strings or use heavy gauges—they will not return to pitch.
- Select a short-scale (24-inch) left-hand model for smaller hands or travel, but only if the bridge is factory left-hand; short-scale conversions are the worst offenders for intonation drift.
Buying tips
- Measure your scale length: 24.75-inch (Gibson-style) vs 25.5-inch (Fender-style) changes string tension and bend feel—pick the scale that matches the right-hand guitar you already play.
- Confirm the nut is left-cut by checking string slot angles in photos; a flipped right-hand nut has slots angled the wrong way and will buzz on open strings.
- Check the bridge saddle direction: on a true lefty, the low-E saddle sits farther back than the high-E; reverse that and the guitar cannot intonate.
- Verify the output jack location—left-hand bodies place it on the lower bout edge away from your leg; a right-hand body flipped lefty puts the jack against your thigh.
Specs
| Body Contour | True left-hand vs converted right |
|---|---|
| Nut Type | Left-cut slots vs flipped right |
| Bridge Saddle | Mirrored lefty vs right-hand |
| Scale Length | 24.75 in vs 25.5 in |
Related searches
What to check before buying
- Measure your body: a full-depth left-hand dreadnought is 4.5–5 inches deep at the lower bout and needs a case rated for left-hand body contours, not a universal right-hand bag.
- Check your amp or interface input is on the correct side for your cable run; left-hand guitars put the jack on the opposite bout from right-hand models.
- Confirm your strap button positions: factory lefties place the upper strap button on the correct horn; a converted body may force the strap across your chest.
- Verify the truss rod access: left-hand necks often have the adjustment at the headstock or heel on the opposite side—ensure you can reach it with your wrench.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
