Ernie Ball Single String Buying Guide
Ernie Ball single strings are individual replacement or custom-gauge strings for electric guitar, acoustic guitar, bass, and pedal steel, sold in the same alloys and constructions as their full sets. The core trade-off is alloy/coating durability versus tone and feel: uncoated nickel-plated steel delivers classic brightness and low cost, while cobalt, stainless, or coated variants extend life under sweat and heavy picking at a higher per-string price. Buy by exact gauge number, winding type, and ball-end style rather than by product-line name alone.
At a glance
- Price range
- Price range not synced yet
- Category
- Brass, Woodwind & Strings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Plain strings are tin-plated high-carbon steel; wound strings use nickel-plated steel, pure nickel, cobalt, stainless steel, or coated wrap over a hex or round core.
- Gauge is printed in thousandths of an inch (e.g., .010, .046); electric plain strings commonly run .008–.017 and wound .018–.056, bass singles .045–.135.
- Ball-end attachment is standard for guitar and bass; pedal steel and some vintage instruments require loop-end or specific ball sizes.
- Coated strings (e.g., Slinky-coated lines) trade a slightly mellower attack for longer life; cobalt and stainless wraps raise output and corrosion resistance versus nickel-plated steel.
Best use cases
- Best fit: replacing one broken string on a standard electric or acoustic guitar — match the exact gauge and alloy family of the remaining set to preserve balanced tension and tone.
- Best fit: building a custom gauge set for drop tunings or hybrid picking — buy individual plain and wound singles in the precise thousandths you need rather than accepting a prepackaged set.
- Wrong fit: assuming any .046 wound string will feel identical — nickel-plated, pure nickel, cobalt, and stainless wraps differ in tension, brightness, and fret wear; stick to the alloy family already on the guitar.
- Wrong fit: using guitar singles on bass or pedal steel — bass strings need heavier cores and longer scale lengths, and pedal steel needs loop-end or specific ball attachments.
Buying tips
- Match gauge exactly: a .010 plain string is 0.010 inch diameter; going up one thousandth (e.g., .010 to .011) noticeably raises tension and may require truss-rod or nut adjustment.
- Stay within the alloy family already installed — mixing cobalt wound with nickel-plated plain strings is fine, but mixing wrap alloys on the same guitar changes balance and intonation feel.
- For basses, confirm scale length (30-inch short, 34-inch long, 35-inch extra-long) before buying a single; a long-scale string on a short-scale bass will not intonate.
- Coated singles cost more per string but outlast uncoated roughly two to three times under acidic sweat; uncoated nickel-plated remains the value pick for frequent changers.
Specs
| String Type | Plain steel / wound nickel, cobalt, stainless |
|---|---|
| Gauge Range | .008–.135 thousandths inch |
| End Type | Ball-end standard; loop-end specialty |
| Scale Fit | Guitar 24.75–25.5 in; bass 30–35 in |
Related searches
What to check before buying
- Know your exact gauge number from the existing string or set packaging — do not estimate by eye; thousandths matter for tension and tuning stability.
- Confirm winding type and core (roundwound vs flatwound, hex vs round core) so the single blends with the rest of the set.
- Verify ball-end style and, for pedal steel or vintage instruments, loop-end or specialty attachment before ordering.
- Check instrument scale length (guitar 24.75–25.5 inches, bass 30–35 inches) so the wound string length covers nut to bridge with enough winding room.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
