D Addario Xs String Buying Guide
D'Addario XS strings are a premium coated guitar string line that pairs a ultra-thin, dispersion-coated wrap wire with a high-carbon steel core for extended tonal life and a natural feel. The core trade-off is coating durability versus tactile snap and brightness: XS uses a thinner, more flexible coating than older coated lines, but players who prize raw, uncoated zing may still prefer nickel-plated or pure-nickel sets. The decision rule is simple—choose XS for maximum lifespan with minimal feel penalty; skip it if you break strings frequently from heavy picking or need the absolute lowest tension feel.
At a glance
- Price range
- Price range not synced yet
- Category
- Brass, Woodwind & Strings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- XS uses a dispersion coating applied to the wrap wire before winding, not a thick after-market sleeve—this keeps the string diameter closer to uncoated specs and reduces flaking.
- The core is high-carbon steel with a hex cross-section, which resists tuning drift and delivers more consistent intonation than round-core designs under aggressive bending.
- Coating thickness on XS is measurably thinner than D'Addario's EXP line, yielding higher perceived brightness and less finger drag out of the pack.
- Available in electric, acoustic, and bass gauges with plain-steel trebles left uncoated on most sets, so the top strings retain a traditional feel.
Best use cases
- Best fit: gigging electric players who sweat heavily and want a set that holds tuning and tone across multiple shows—pick XS nickel-plated steel in your usual gauge and skip uncoated sets.
- Best fit: acoustic singer-songwriters recording with a single condenser mic who need reduced finger squeak—choose XS Phosphor Bronze and avoid 80/20 bronze if you want a warmer, less bright top end.
- Wrong fit: players who change strings before every session for maximum fresh-string snap—skip XS and buy bulk uncoated nickel or pure-nickel sets instead.
- Wrong fit: bassists who prefer a broken-in, thumpy flatwound feel—XS rounds are still rounds; go flatwound or tapewound rather than coated rounds.
Buying tips
- Match the gauge suffix exactly: electric XS sets run from .009–.042 to .012–.052; going up one gauge step increases tension roughly 10–15% and may require a truss-rod tweak.
- For acoustic, choose Phosphor Bronze XS over 80/20 if you want a mellower fundamental; 80/20 XS is brighter but loses that edge faster under heavy strumming.
- Check the plain-string count: most XS electric sets leave the top two or three plain strings uncoated, so bending feel stays normal—if you need full-set coating, look at fully coated alternatives.
- Buy the correct scale length for bass: long-scale (34") and extra-long (35") XS bass sets are not interchangeable; a 35" set on a 34" bass will feel stiff and may not intonate.
Specs
| Coating Type | Dispersion-coated wrap wire |
|---|---|
| Core Material | High-carbon steel, hex core |
| Wrap Options | Nickel-plated / Phosphor Bronze |
| Lifespan Rating | Up to 3x uncoated |
Related searches
What to check before buying
- Confirm your guitar's scale length and current string gauge before ordering—XS sets are tension-matched to standard scale, and a jump from .010 to .011 needs a setup check.
- Verify bridge and nut slot width can accept the coated wrap diameter; coated strings run marginally thicker at the ball end on some bass sets.
- For acoustic-electrics, ensure your piezo or magnetic pickup is compatible with phosphor bronze (non-magnetic)—XS acoustic sets are bronze and won't drive a magnetic soundhole pickup.
- Check that your tuners accept the plain-steel treble strings without slipping; locking tuners are ideal but standard posts work fine with proper winding.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
