ToneHarbor

D Addario Baritone String Buying Guide

D'Addario baritone strings are a focused family of wound strings for baritone guitar, baritone ukulele, and baritone-scale instruments, where the core trade-off is scale-length/gauge matching versus the risk of a floppy, intonation-shifting setup. The decisive rule: buy a set whose published tension is calibrated to your instrument's exact scale length and tuning — not a generic "baritone" label — and skip any set that lists only gauge without tension or scale guidance.

Instrument Type:Baritone guitar / baritone ukuleleWrap Material:Nickel-plated steel vs phosphor bronzeGauge Range:.012–.070 (guitar); nylon uke setsCoating:Uncoated vs EXP coated polymer

At a glance

Price range
Price range not synced yet
Category
Brass, Woodwind & Strings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Baritone guitar sets from D'Addario typically run .013–.062 or .014–.068 for B-to-B tuning on 27"–28" scale; lighter sets are for shorter 26.5" scales.
  • Baritone ukulele sets are nylon/fluorocarbon, not steel, and use D-G-B-E tuning on a 19"–20" scale — steel guitar sets will damage the uke's neck and bridge.
  • Wound string construction matters: nickel-plated steel (EPS/EXL) for electric baritone, phosphor bronze (EJ/EXP) for acoustic baritone, and flatwound for mellow electric jazz tones.
  • D'Addario's coated EXP line adds a thin polymer layer that extends string life on sweaty hands, while uncoated sets deliver brighter initial tone at lower cost.

Best use cases

  • Electric baritone guitar in B-standard: pick a nickel-plated steel set with .013–.062 or .014–.068 gauges matched to a 27"–28" scale, and skip acoustic phosphor bronze sets that won't intonate cleanly through magnetic pickups.
  • Acoustic baritone guitar: choose phosphor bronze .016–.070 sets for a 27.5"–28" scale, and avoid electric nickel sets that sound thin and underpowered on a large acoustic body.
  • Baritone ukulele: use dedicated nylon/fluorocarbon D-G-B-E sets only; skipping steel guitar sets prevents bridge lift and neck warp on a 19"–20" scale uke.

Buying tips

  • Match gauge to scale: 26.5" baritone guitars need .012–.058 to .013–.062; 27"–28" scales take .014–.068; 28.5"+ scales handle .016–.070 without excessive tension.
  • For B-to-B tuning on a 27" scale, total set tension should land near 90–110 lb; tension below 80 lb causes fret buzz and poor intonation.
  • Choose nickel-plated steel for electric baritone pickups and phosphor bronze for acoustic baritone bodies — using the wrong wrap material alters output and tone balance.
  • Coated strings (EXP) cost more but last 2–3× longer on acidic skin; uncoated sets are the pick for studio sessions needing maximum fresh-string brightness.

Specs

Instrument TypeBaritone guitar / baritone ukulele
Wrap MaterialNickel-plated steel vs phosphor bronze
Gauge Range.012–.070 (guitar); nylon uke sets
CoatingUncoated vs EXP coated polymer

Related searches

What to check before buying

  • Measure your instrument's scale length nut-to-bridge saddle, not the body size — baritone guitars range 26.5"–30" and gauge choice depends on this exact number.
  • Confirm tuning target: B-standard, A-standard, or C-standard changes the required gauge by roughly one step per whole tone.
  • Verify your instrument's nut slot width and bridge pin hole size accept the largest string in the set, especially .068–.070 low strings.
  • For baritone ukulele, confirm nylon/fluorocarbon strings and a 19"–20" scale — standard guitar strings are a hard no.

FAQ

All Brass, Woodwind & Strings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.