D Addario Acoustic Guitar String Buying Guide
D'Addario acoustic guitar strings are the most widely stocked brand family for steel-string acoustics, spanning coated and uncoated, phosphor bronze and 80/20 bronze, and multiple gauge tiers. The core trade-off is tone lifespan versus feel and brightness: coated strings (EXP, XS, XT) resist corrosion and last several times longer, while uncoated sets deliver maximum snap and lower finger friction. The decision rule is simple—match gauge and alloy to your playing style first, then choose coating only if your hands or climate eat strings quickly.
At a glance
- Price range
- Price range not synced yet
- Category
- Brass, Woodwind & Strings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Phosphor bronze (PB) delivers warm, balanced tone and longer life than 80/20 bronze, which is brighter but loses zing faster.
- Coated tiers differ in construction: XS uses a thin film coating over the entire string, XT uses a polymer-treated winding, EXP uses a micro-coating on the wrap wire only.
- Gauge sets follow standard acoustic sizing: Extra Light .010–.047, Custom Light .011–.052, Light .012–.053, Medium .013–.056, and Bluegrass .012–.056.
- D'Addario's NY Steel hex core with fusion twist at the ball end increases break resistance and tuning stability versus plain high-carbon cores.
Best use cases
- Best fit: Fingerstyle and studio players with clean, dry hands—buy uncoated Phosphor Bronze Lights (.012–.053) for maximum tone and low finger noise.
- Best fit: Touring or humid-climate players—buy XS coated Phosphor Bronze for 3–4x lifespan and consistent feel across sweaty sets.
- Best fit: Flatpickers and strummers needing volume and tuning stability—buy Medium or Bluegrass gauge with NY Steel core.
- Wrong fit: Players on a budget buying coated strings for a guitar that stays in its case—uncoated PB delivers equal tone at lower cost with less coating dullness.
Buying tips
- Tension math: Light (.012–.053) totals roughly 160–170 lb across six strings; Medium (.013–.056) adds 15–20 lb—verify your guitar's top bracing and nut slots before upsizing.
- Alloy rule: Choose 80/20 bronze only if you want maximum initial brightness and change strings monthly; choose Phosphor Bronze for warmth and 2–3x tonal stability.
- Coating tier rule: XS is the longest-lasting but slightly dampens highs; XT balances coating life with near-uncoated tone; EXP is the middle ground at lower cost.
- Gauge compatibility: Never jump more than one gauge step without a setup—nut slot width and truss rod relief must be adjusted for .013+ sets.
Specs
| Winding Alloy | Phosphor Bronze / 80-20 Bronze |
|---|---|
| Gauge Range | Extra Light .010 - Medium .013 |
| Coating Tier | Uncoated / EXP / XT / XS |
| Core Construction | NY Steel hex core, fusion twist |
Related searches
What to check before buying
- Measure your guitar's scale length (typically 24.75–25.5 in) and nut slot width; strings above .053 require widened slots on many stock nuts.
- Confirm your guitar's top bracing is rated for Medium (.013–.056) tension—light-braced or vintage instruments should stay at .012 or below.
- Check your climate: high humidity accelerates uncoated string corrosion, making coated tiers the practical choice in tropical or coastal areas.
- Verify you have the correct number of strings for your instrument—12-string sets pair .010/.014, .012/.017, etc., and require a dedicated 12-string pack.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
