ToneHarbor

Catgut String Buying Guide

Catgut strings are twisted natural cord made from sheep or cattle intestinal serosa, prized by gut-string players for warm tone and historical authenticity. The core trade-off is raw material purity versus tuning stability: high-grade gut stays in tune and lasts, while cheap unpolished gut frays, stretches, and breaks. Choose polished, varnished, single-knot gut from a known string maker for playable durability; skip bargain unpolished coils sold for craft or banjo use.

Material:Sheep or cattle serosa (no cat)Surface Finish:Polished & varnished vs raw unpolishedGauge Range:0.50–1.30 mm+ by pitchEnd Type:Knotted loop vs plain tie end

At a glance

Price range
Price range not synced yet
Category
Brass, Woodwind & Strings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Material grade: sheep gut is softer and warmer; cattle gut is denser and louder — 'catgut' is a misnomer, no cat material is used.
  • Surface finish: polished and varnished gut resists humidity and fraying; raw unpolished gut is for historical reproduction only and degrades fast.
  • End finish: knotted or looped ends suit period tailpieces; plain ends require a knot tied by the player and are not pre-stretched.
  • Gauge system: gut strings are sold by diameter in millimeters or by historical gauge numbers — thicker gut = lower pitch and higher tension.

Best use cases

  • Best fit: baroque violin, viola da gamba, lute, and historical harp — pick polished varnished sheep-gut singles in the correct gauge for period tuning.
  • Best fit: folk fiddle and old-time banjo players wanting gut-like warmth — choose a modern gut or gut-core set with a knotted tailpiece end.
  • Wrong fit: modern steel-string acoustic guitars and electric basses — gut has low tension and short life under high tension; use nylon or steel instead.
  • Wrong fit: beginner student instruments — gut is expensive and humidity-sensitive; start on synthetic core and move to gut for period performance.

Buying tips

  • Match gauge to pitch: for violin E use roughly 0.50–0.55 mm; A about 0.70–0.80 mm; D about 0.90–1.00 mm; G about 1.10–1.30 mm — verify against your instrument's scale length.
  • Buy polished, varnished, pre-stretched gut for tuning stability; raw unpolished gut needs frequent tuning and lasts a fraction as long.
  • Choose loop or knotted ends only if your tailpiece has hooks; plain ends require tying a figure-eight knot and seating it before tuning.
  • Store gut strings at 40–60% relative humidity; dry rooms cause cracking and high humidity causes stretching — keep spare strings in a sealed bag.

Specs

MaterialSheep or cattle serosa (no cat)
Surface FinishPolished & varnished vs raw unpolished
Gauge Range0.50–1.30 mm+ by pitch
End TypeKnotted loop vs plain tie end

Related searches

What to check before buying

  • Measure your instrument's vibrating string length and tailpiece type; gut gauge and end finish must match the scale and hook style.
  • Confirm your pegbox and nut slots accept thicker gut diameters — gut runs larger than steel for the same note.
  • Check your playing environment: gut needs 40–60% RH; forced-air heating or tropical humidity shortens string life.
  • Ensure you have a tailpiece with fine tuners or gut-compatible hooks; gut stretches more than steel and needs retuning during break-in.

FAQ

All Brass, Woodwind & Strings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.