Brass Guitar Nut Buying Guide
A brass guitar nut is a replacement string slot component machined from brass alloy, chosen for its density and sustain transfer versus standard plastic or bone nuts. The primary trade-off is tonal warmth and tuning stability against added neck-end mass and the need for precise slot filing. The clear decision rule: buy a pre-slotted or custom-filed brass nut sized to your exact neck width and radius; skip any nut sold as a universal fit with no radius or string-spacing spec.
At a glance
- Price range
- Price range not synced yet
- Category
- Brass, Woodwind & Strings
- Data updated
- Nov 16, 2026
Current offers
Highlights
- Brass alloy grade matters: C360 free-machining brass offers consistent density and corrosion resistance; ungraded 'solid brass' may be softer leaded alloy that wears faster.
- Nut slot spacing must match the guitar's fretboard radius and string spread; a flat-bottom nut on a 9.5-inch radius neck causes poor action and tuning bind.
- Pre-slotted brass nuts are cut for common string gauges (.009-.042 or .010-.046); heavier gauges require re-filing or a slotted-blank option.
- Brass transfers vibration more efficiently than plastic but less than bone or graphite; expect brighter sustain with slightly more high-end zing than a bone nut.
Best use cases
- Best fit: upgrading a budget electric guitar with a plastic nut to improve sustain and tuning stability—choose a pre-slotted brass nut matched to neck width and radius.
- Best fit: building or repairing a cigar-box or lap steel where brass mass and bright tone are desired—select a slotted brass blank and file to string gauge.
- Wrong fit: acoustic guitars with under-saddle piezo pickups—brass nut mass can alter balance; use bone or synthetic nut instead to preserve factory voicing.
- Wrong fit: guitars with locking tremolo systems needing a locking nut—brass replacement nuts are non-locking and will not substitute for a Floyd Rose-style clamp.
Buying tips
- Measure neck width at the nut (commonly 1.650 in / 42 mm or 1.687 in / 43 mm) and fretboard radius (7.25, 9.5, 12, or compound); match both before ordering.
- For string gauge changes, buy an unslotted brass blank and have slots cut to your exact gauge set; pre-slotted nuts are cut for standard light or medium sets.
- Check nut thickness (front-to-back) against the slot in the neck; standard Fender-style is about 1/8 in (3.2 mm), Gibson-style about 3/16 in (4.8 mm).
- Prefer C360 or C385 brass alloy with a smooth machined finish; avoid cast or sintered brass nuts with visible porosity that can crack under string tension.
Specs
| Material Grade | C360 brass / C385 brass |
|---|---|
| Nut Width | 42 mm / 43 mm / 44 mm |
| Fretboard Radius | 7.25 / 9.5 / 12 in / compound |
| Slot State | Pre-slotted / unslotted blank |
Related searches
What to check before buying
- Measure nut slot width, depth, and string spread on your guitar with calipers; compare to the brass nut's published dimensions.
- Confirm fretboard radius at the nut and choose a nut with matching bottom radius or a flat-bottom design intended for sanding to radius.
- Check string gauge and tuning machine post spacing; heavier gauges may need wider slots or a blank nut for custom filing.
- Verify the nut height above the first fret matches your preferred action; brass nuts often require sanding the bottom to set slot depth.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
