ToneHarbor

12 String Electric Guitar String Buying Guide

12-string electric guitar strings are paired-course sets that tune the fundamental and octave strings together, doubling tension and requiring a heavier low-end and lighter high-end than 6-string sets. The core trade-off is octave-string durability versus intonation stability: cheap plain-steel octave strings break and go sharp, while quality sets use reinforced plain steel or wound octave strings for the higher courses. The decision rule is simple—buy a set explicitly labeled for 12-string electric with correct gauges per course, and skip any generic 6-string set doubled up, which will not intonate or hold tension.

Gauge Range:.009–.042 / .010–.046Wrap Material:Nickel-plated / Pure nickel / CoatedOctave G Course:Plain steel vs woundScale Fit:24.75 in vs 25.5 in

At a glance

Price range
Price range not synced yet
Category
Brass, Woodwind & Strings
Data updated
Nov 16, 2026

Current offers

No verified match right now. Browse live listings:

Highlights

  • Standard 12-string electric gauges run .010–.046 or .009–.042, with the octave strings on the G, D, A, and low E courses being plain steel or wound depending on set tier.
  • Octave strings on the G and D courses are the most break-prone; premium sets use reinforced plain steel or a wound octave for the G course to survive bending and capo use.
  • Nickel-plated steel is the standard electric wrap for balanced output; pure nickel gives warmer tone but shorter life, and coated sets extend octave-string life at the cost of brightness.
  • Locking tuners and a well-cut nut are mandatory on 12-strings—string breakage at the nut and bridge is the leading cause of premature octave failure, not the string itself.

Best use cases

  • Best fit: studio and stage players who bend octave strings and use capos should pick reinforced-plain or wound-octave sets in .010–.046; skip budget plain-octave sets that break at the G course.
  • Best fit: jangly arpeggio and rhythm players who rarely bend can use standard .009–.042 nickel-plated sets and accept shorter octave life in exchange for easier playability.
  • Wrong fit: players restringing a 12-string with two 6-string sets will fight intonation and tension—buy a dedicated 12-string set with the correct per-course gauges or skip the restring.
  • Best fit: vintage-voiced players wanting warmth should choose pure nickel wraps and plan to change octave strings more often; skip coated sets if maximum brightness is the goal.

Buying tips

  • Match the set to the guitar's scale length: 24.75-inch 12-strings tolerate .010–.046, while 25.5-inch models should use .009–.042 to keep total tension playable.
  • Count courses before buying: a true 12-string set has 12 strings with octave gauges on the E, A, D, and G courses—verify the gauge chart lists all 12 individually.
  • Choose reinforced plain steel or a wound G octave if you capo above the 5th fret or bend; plain octave G strings are the first to fail under those conditions.
  • Coated strings extend octave-string life by roughly 2–3x but mute the chime slightly; uncoated nickel-plated sets sound brightest but need more frequent octave replacement.

Specs

Gauge Range.009–.042 / .010–.046
Wrap MaterialNickel-plated / Pure nickel / Coated
Octave G CoursePlain steel vs wound
Scale Fit24.75 in vs 25.5 in

Related searches

What to check before buying

  • Measure scale length and confirm the set's gauge chart is rated for that scale—12-string tension doubles, so an over-gauge set can bow the neck or lift the bridge.
  • Inspect nut slots and bridge saddles for burrs before restringing; any roughness will cut octave strings regardless of set quality.
  • Confirm your tuners are 12-string compatible with correct post spacing and that the guitar has a 12-string-specific truss rod adjustment range.
  • Check the set includes the correct octave gauges for each course (plain vs wound G octave) and that the low E course is wound, not plain.

FAQ

All Brass, Woodwind & Strings buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 16, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.